This XR Dewalt Brushless 7 Piece Kit, contains the following: DCD796N XR Brushless Combi Hammer Drill DCF887N XR Brushless Impact Driver DCG405N XR Brushless Grinder DCP580N XR Brushless Planer DCS391N XR Circular Saw DCS331N XR Jigsaw DCS380N XR Recip Saw 3 X DCB184 5.0ah Batteries 1 X DCB115 Charger Tool Bag DCD796N XR Brushless Combi Hammer Drill Features The DeWalt DCD796 compact combi hammer drill featuring brushless technology is up to 30% more powerful than the DCD795 with 460 units Watts Out (UWO). This Combi drill is ultra compact and lightweight design allows use in confined spaces.
The two speed all metal transmission provides increased runtime and longer tool life. It also has drill driver and hammer feature for multiple applications. 15 position adjustable torque control for consistent screw driving into a variety of materials.
Intelligent trigger design allows for total control of application. Improved ergonomic design with rubber grip over mould improving users comfort. Improved air flow to the motor for cooler electronics and increased power. DCF887N XR Brushless Impact Driver Features The DeWalt DCF887 XR Brushless Impact Driver is Equipped with application control, this is achieved through 3 motor speeds and torque settings.Precision Drive mode offers additional control in screw driving applications to avoid material and fastener damage. Fitted with a high power, brushless motor that is capable of outputting up to 205Nm of torque, ensuring heavy applications are completed quickly. It has a super lightweight and compact design that is very comfortable to use and fits in small spaces. The 3 LED, Halo light ring offers excellent work piece lighting. Latest generation 18V XR Li-Ion Brushless Impact Driver. 3 Mode Impact selector improves user control. Improved Brushless motor provides 28% increased torque.
3 LED Halo ring provides maximum illumination of work piece 6.35mm drop and load hex bit holder allows for quick, one handed fitment Aluminium front housing provides greater heat dispersion increasing motor life Ergonomic handle and rubber overmold reduces vibration and user fatigue DCG405N XR Brushless Grinder Features The Dewalt DCG405 Brushless Angle Grinder has a no load speed of 9000rpm and a 125mm disc diameter. Built in no-volt release gives protection against accidental start ups when new battery is installed Electronic brake has braking time of < 2 seconds when the trigger is released to help reduce accidental contact and injury Constant Clutch and E-Clutch protects from kickbacks, cuts and wheel bursts Mesh Covers restricts dust being sucked through the motor Ergonomic slim body with rubber over-mould for improved comfort and control Two Position Side Handle offers greater comfort and control 1 or 2 touch guard for quick and easy keyless adjustment DCP580N XR Brushless Planer Features The new DCP580N features a brushless motor which guarantees you'll get an efficient and cost-effective planer that will last for years to come. It will accept any of DeWalt's family of 18V XR Li-ion batteries so you can mix and match with your current tool collection.It has twin blades for a smoother finish, market-leading rebate capacity, increased runtime and a precision 0.1mm depth adjustment. With on-board blade/torx key storage and an air lock port this is a great all-round performer. Powerful brushless motor provides smooth planing performance combined with extended runtime Lightweight, compact and ergonomic design for comfortable use in all orientations Large twin blade drum with TCT blades for high quality surface finish On-board blade storage and Torx key enable fast blade change and minimise downtime Large front and rear shoe for improved stability Compatible with AirLock dust extraction system DCS391N XR Circular Saw Features The saw has a powerful and highly efficient PM58 DeWalt fan cooled motor with replaceable brushes which delivers 3,700 per minute for fast cutting action. The ultra thin kerf 165 mm, 24 tooth carbide-tipped blade allows for efficient run time and fast, smooth cut finish at maximum 55 mm depth of cut with the intelligent trigger allowing total control over all applications. The DCS391 has an extremely durable tool design, including a cast magnesium base for repetitive, accurate cuts, keyless bevel angle and depth of cut adjustment with easy to read scale for maximum cordless versatility, spindle lock for quick and easy blade change and has a lock off switch and electronic motor brake for additional control and work safety.
DCS331N XR Jigsaw Features Latest generation premium Jigsaw featuring new XR Lithium Ion Technology. Part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster. Powerful & Highly efficient DEWALT PM47 fan-cooled motor with replaceable brushes. Delivers fast cutting action up to 3000 strokes per minute maximising user productivity. Intelligent variable speed trigger & lock-off switch for quick controlled cuts and enhanced work safety.
Tool-free adjustable shoe with anti-scratch cover bevels 45 degrees in both directions. Quick and easy patented keyless blade change system, accepts T-shank blades. Patented anti-vibration counter-balance mechanism and rubber grip providing a smooth operation.3-position pendulum action controls the aggressiveness or smoothness of cuts. Dust blower keeps line of cut clear of dust and debris.
Modular component design for trouble free servicing. Rubber coated grip to reduce surface vibration and user fatigue. The Powerful & Highly efficient DEWALT PM50 fan-cooled motor with replaceable brushes which delivers fast cutting action up to 3000 strokes per minute maximising user productivity. Tool-free adjustable shoe with anti-scratch cover bevels 45 degrees in both directions and quick and easy patented keyless blade change system, accepts T-shank blades.
DCS380N XR Recip Saw Features Latest generation premium Reciprocating Saw featuring new XR Lithium Ion Technology Part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster Powerful & Highly Efficeint PM58 DEWALT fan cooled motor with replaceable brushes, delivers fast cutting action up to 2,950 strokes per minute and 28.6 mm stroke length maximising user productivity Intelligent variable speed trigger, lock-off switch and electronic motor brake for quick controlled cuts and enhanced work safety Lever-action keyless blade clamp for quick and easy blade changes Pivoting adjustable shoe with open top for high stability and blade visibility during a cut Four-position blade clamp allows for flush cutting and increased versatility Improved ergonomic design. DCD796N XR Brushless Combi Hammer Drill Specifications: Voltage: 18v Power Output (W): 460 Soft Application Max Torque (Nm): 27 Hard Application Max Torque (Nm): 70 Torque Settings: 15 + Drill Brake Type: Electric No. Of Gears: 2 LED Job Light: Yes / Delay / Base-mounted Battery Capacity Indicator: No Battery Compatibility: 18v Lithium-Ion (XR) Rotation: Forward / Reverse Variable Speed Control Trigger: Yes No Load Speed (RPM) High: 0-2000 No Load Speed (RPM) Med: N/A No Load Speed (RPM) Low: 0-550 Chuck Type: 3-Jaw / Single Sleeve Keyless / All Metal Chuck Capacity (mm): 1.5-13.0 Drill Capacity: Concrete (mm): 13 Drill Capacity: Metal (mm): 13 Drill Capacity: Wood (mm): 40 Impact Rate (BPM) High: 0-34000 Impact Rate (BPM) Med: N/A Impact Rate (BPM) Low: 0-9350 Overall Length (mm): 190 Net Weight Approx. Kg with 1.5/2Ah Batt: 1.6 Net Weight Approx.
Kg with 3/4/5Ah Batt: 1.8 Brushless Motor: Yes DCF887N XR Brushless Impact Driver Specification: Voltage - 18 V Max Torque - 205Nm Power Output - 280 Watt No Load Speed - 0 - 3250 rpm Max. Bolt Diameter - M12 Bit Holder - 1/4 (6.35mm) Length - 135 mm Height - 196 mm DCG405N XR Brushless Grinder Specifications Battery Voltage: 18v Battery Chemistry: XR Li-Ion No Load Speed: 9000 rpm Max. Disc Diameter: 125 mm Spindle Thread: M14 (22 mm) Weight: 2.5 kg DCP580N XR Brushless Planer Specifications Battery chemistry - XR Li-Ion Voltage - 18 V No Load Speed - 15,000 rpm Maximum Depth of Cut - 2.0 mm Rebating Depth - 9.0 mm Planer Width - 82 mm Shoe Length - 295 mm DCS391N XR Circular Saw Specification Blade Diameter: L 165 mm Power Output: 460 Watts No Load Speed: 3,700/min Bevel Capacity: 50 Max.
Depth of Cut At 90 : 55 mm At 45 : 42.1 mm Weight: 3.8 kg Length: 360 mm Height: 240 mm DCS331N XR Jigsaw Specifications Voltage: 18V Power Output: 400 Watts No Load Stroke Rate: 0-3000 spm Stroke Length: 26mm Bevel Capacity: 45 Max. Depth of Cut Wood: 135mm Max.
Our carriers apply a surcharge to certain UK Islands, Northern Ireland and the Scottish Islands, unfortunately we have to pass this charge on to our customers. Whilst we do not want to pass on surcharges to our customers we are unable to absorb the full cost of sending to these orders. The only exception to this are items that are delivered on a palletised service which will have to be booked in with a member of our Buyaparcel team. Any parcel being delivered by courier will require a signature on arrival. If you are not at home the driver will leave an information card.
You can track the progress of your parcel by the Track My Order link at the top of the page. If your goods have been sent by a trackable service you will be able to track your order stage by stage using the couriers online tracking system. Buyaparcel UK Deliveries - Couriers.
If the date and time is not convenient, you can simply either text back or reply back via the website to choose the next convenient date, leave in a safe place or leave with a neighbour. Please check the UKMAIL/DHL site for your closet depot. Details of these zones are below. Zone 2 The Highlands and Islands of Scotland postcodes IV, HS, KA27-28, KW, PA20-49, PA60-78, PH17-26, PH30-44, PH49-50, ZE.Zone 3 Northern Ireland, Isle of Man and Isles of Scilly -postcodes BT, IM, TR21-25. Please note - items over 1.4m are manually handled through sortation, this can cause the item to take up to 48hrs to be delivered. If you goods are being delivered on a pallet, you will need to sign for this. Buyaparcel International Deliveries - Couriers. We are able to service most of mainland Europe using the DHL Connect and Express Services. Our team work extremely hard to get your parcels to your door is the shortest possible time but please note that we recommend you do not book a plumber etc until you have received and checked your goods. Credit / Debit card - We accept all major credit and debit cards. The order must be sent to the same address as the billing address. Please call 01502 473025 for further information. Once you inform a member our team, you can then return the parcel within 30 days of receiving the goods. This is under the following conditions.
Carriage charges for returning unwanted parcels or items ordered in error are at your expense, we cannot be held responsible for this. Please use a traceable service, otherwise there is a possibility the courier could misdeliver your goods and your parcel will not be relocated. We cannot be responsible for which courier you choose to return any items back with.It is highly important that you check your goods as soon as they are received. Damaged items delivered with Palletways must be noted when you sign for it and reported to us within 24 hours. It must be signed as either damaged or unchecked for the claim to hold. Return costs will only be covered if authorised by a member of the Buyaparcel team. We cannot be held responsible for an arranged collection that fails. If this occurs, you will need to return the parcel of your own accord, no matter the reason for the original collection. Faulty Goods: If your item arrives faulty, you must report it to us within 24 hours.
Emailing us that you wish to cancel your order does NOT guarantee its cancellation. Only once the order has been confirmed as cancelled by a member of our team is this the case. Once an order is in the despatching process, we are then unable to cancel it. We do not take financial responsibility for the cost of the return of any products ordered in error or that are no longer wanted.
If this is the case you will be contacted by the carrier advising how to arrange redelivery. Your statutory rights will not be affected. We cannot be held responsible for any costs incurred whilst you are in communication with our team. Makita DHP453Z 18v LXT Combi Hammer Drill Driver - Bare Tool. Makita DK1493WX 10.8v Lithium Ion Li-ion Combi Hammer Drill + Impact Driver.
Makita DLX2145TJ 18v LXT DHP458 Combi Drill + DTD152 Impact Driver 2 x 5.0AH. Dewalt XR 18v 6 Piece Brushless Kit + 3 x 5.0Ah Li-Ion Batteries Charger & Bag.Dewalt XR 18v 7 Piece Brushless Kit + 3 x 5.0Ah Li-Ion Batteries Charger, Bag. Dewalt XR 18v 10 Piece Brushless Kit + 4 x 5.0Ah Li-Ion Batteries Charger Tstak. Dewalt XR 18v 6 Piece Brushless Kit + 3 x 5.0Ah Li-Ion Batteries Charger + Bag. Dewalt XR 18v 9 Piece Brushless Kit + 4 x 5.0Ah Li-Ion Batteries Charger Bag.
SIGN UP TO OUR NEWSLETTER. Stay up to date with our special offers & promotions. The item "Dewalt XR 18v 7 Piece Brushless Kit + 3 x 5.0Ah Li-Ion Batteries Charger + Bag" is in sale since Thursday, May 17, 2018.This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Power Tool Sets". The seller is "buyaparcel-store" and is located in GB. This item can be shipped to all countries in Europe, United States, Japan, Canada, Australia, Bahrain, Brazil, New Zealand, China, Israel, Hong Kong, Indonesia, Malaysia, Mexico, Singapore, South Korea, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Ecuador, Egypt, Guadeloupe, French guiana, Jordan, Cambodia, Sri lanka, Macao, Maldives, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Saudi arabia, South africa, United arab emirates, Bahamas, Colombia, Jamaica, Kuwait, Panama, Qatar, Uruguay, Viet nam.